Skip to main content

SOC Evangelion 04 Production Model: Smaller But Solid


Photobucket

I was originally going to review all of my Soul of Chogokin toys in the order in which I purchased them, but I got really behind, and I can't remember what order I purchased them in anymore. So instead I decided to review the remaining ones in the order that they were released. Which is interesting, because Bandai has been making Soul of Chogokin toys for a very long time, the first one came out in 1997, the oldest one I own is the GX-03 Combattler V which was originally released in 1999. The previous Eva figure I reviewed was part of the Spec sub line (a supposedly cheaper and more toy like line) and was released in 2008, this Eva figure is part of the SOC proper line and was released in 2004, so there's quite a bit of difference in construction.

Amusingly, this is actually my most recent SOC purchase, I got it because I had a gift certificate to burn, and the figure was cheap and shiny.

The story behind Eva 04 is it was one of the production models, as opposed to the prototype, 00, or the test type, 01. Eva 04 was never actually shown in the anime, it was mentioned at one point that the entire facility it was built at was completely irradicated under somewhat mysterious circumstances.

Photobucket

04 features quite a bit more diecast metal content than the Spec 00 does, it's also only about 75% of the size.
Photobucket

Here the shoulder fins are actually clipped on via a magnetic attachment point, which works fine, but it's a little fiddly.

Photobucket

Once again the Eva has an impressive amount of articulation, and the joints are solid enough to hold most poses. Oddly, it only comes with two sets of hands, the standard splayed finger "jazz hands" and a set that are sort of halfway between forming a fist, and holding something.

Photobucket

One nice little touch on this Eva is an articulated mouth.


This Eva also has too sets of shoulder fins, one sleek set, and one functional set that hide weaponry.

Photobucket


Photobucket

The different between the two is much more drastic than on the Spec Evas, and the functional fins also have some unsightly exposed screws.
Photobucket
The right should again has the projectile battery, I believe this method of opening the fin is less cartoon accurate.

Photobucket

The left shoulder has the hidden knife sheath, this one can actually hold the full sized combat knife, however, the sheath doesn't fold into the fin, and thus the compartment can't be closed while the knife is inside it.

Photobucket


Photobucket

The figure comes with three entry plugs, that can actually be fired out of the figures back with a spring loaded release. I don't know if it's the age of the figure, if mine's defective, or if the design is flawed, but I had a lot of trouble getting the plugs to stay in, and then fire.

Photobucket

Onto the weapons, first up is the photon rifle, this is a really big gun that locks onto his shoulder be replacing one of the fins.

Photobucket

He also has the standard Eva assault rifle, it can even be stored in a weapon case, which is kind of awesome.
Photobucket


Photobucket


Photobucket

One thing about his hands is that it can be quite difficult fitting these hands around the gun grips, they can't be simply slid into the hand since the handle is capped on both sides, so you have to stretch the fingers around and worm the hand onto the gun. It's a little worrying, feeling like the hand might eventually become brittle and crack, or just tear off.

Photobucket

Like all Evas, 04 has to occasionally gas up.

Photobucket

I almost forgot the bazooka/rocket launcher thingy.

Being one of the earlier full SOC releases, this figure comes with a stand that holds most of it's accessories. This stand requires more than a little assembly and is surprisingly complicated.

Photobucket


Photobucket

Once you've got it all assembled, it holds most of the weapons, has the charging hose fed into a hole in the base, and has pillars that fit the shoulder fins, almost like the Eva is resting on it.

Bottom line, it's a very nice figure, but while it has a higher diecast content, to me it just doesn't compare to the level of detail on the Spec figures, if you love Evas and want to get one from the SOC line, I would recommend the Spec line.

Comments

  1. If only they'd make SOC Gurren Lagann stuff

    ReplyDelete
  2. Nice pics! Actually, the progressive knife does fit into the knife-holding shoulder fin! The sheath itself is on a joint, just push it into the fin before closing the lid. Nice feature, but I still prefer the sleeker fins!

    ReplyDelete

Post a Comment

Popular posts from this blog

Toy Review: Tekkaman Blade & Pegas

Today I've got Tekkaman Blade & Pegas from Bandai's Soul of Chogokin SPEC line. SPEC is a subset of the Soul of Chogokin, and is supposed to feature more modern characters, in more toy like incarnations, also typically with less metal content. This is the first SPEC toy that I've ever picked up. There have been a couple of different cartoons feature the Tekkaman character, none of which have I seen, but from what I've gathered, this toy is based on the designs from the 90's OVA Tekkaman Blade. In the cartoon an invading alien force abducts humans and turns them into cyborg warriors called Tekkamen. Blade is the title character, and he manages to escape being fully brainwashed, in order to return to Earth and thwart the invasion. The conversion process being icomplete, he has some disadvantages, which require him to use the larger mech, Pegas as a means of transforming into his Tekkaman form, also he can only stay in his Tekkaman form for 30 minutes, or risk goin…

GX- 59 Daltanious: Robbed Of Being Voltron

One of the things that I love about doing reviews for these old super robots is reading up on their back story and finding all kinds of interesting facts. So, quick! What's the first thing that you think of when I say "Voltron"? Pretty much, if you even know what Voltron is, you're going to think of this first:



Five robot lions that combine to make a giant humanoid robot. If you were a male child raised in the '80s, then you know who Voltron is. A smaller subset will remember that there were two Voltrons, the lion Voltron, and then a Voltron made out of 15 vehicles, often just called Vehicle Voltron:

An even smaller subset will remember that there were actually three Voltrons, the third being made of three smaller humanoid robots, and called Gladiator Voltron:



What's the deal with all of the Voltrons? Voltron was a similar project to Hasbro's Transformers, and Tonka's Gobots, where a company took existing toy properties from Japan, and used them to la…

Optimus Prime World Tour Stop 8: Armada Optimus Prime

So, last time I covered Robots In Disguise Optimus Prime, which was the first Prime toy I bought as an adult, but what actually got me back into collecting was reading a Toy Fair magazine that had a feature on the upcoming Armada toy line. As I recall, the article didn't even have any pictures of the new toys, just some descriptions of a few samples, and an overall theme for the line. In the article, at least, Armada was described as the first full collaboration between Hasbro and Takara, prior to Armada, each company worked more or less independently, and would choose to use media or toys from the sister companies on a case by case basis. Most of the US cartoons were brought to Japan at some point, while Robots In Disguise was the first Japanese TF cartoon to be brought to the states.
So, what was Armada supposed to be about? The idea was Mini-cons, a new name for an old idea, which is little tiny Transformers. Look back at Star Convoy. The difference this time was that there wa…